COLLECTION & DELIVERY SERVICE AVAILABLE NATIONWIDE
Please contact us for full details |
|
TVR CHIMAERA 12000 MILE/24 MONTH FACTORY SCHEDULE
- Carry out preliminary road test.
- Check seat belts operation and mountings.
- Check operation of all electrical
components (inc. alarm and air conditioning).
- Remove all road wheels.
- Clean up hubs and apply anti-seize
compound to hub spigots.
- Check handbrake operation and lever
security, adjust and lubricate if required.
- Inspect callipers for leaks, discs for
condition, flexible hoses for condition.
- Remove front and rear pads and check for
deterioration, wear and cracks.
- Change brake fluid.
- Check fuel, clutch and brake pipes/unions
for chafing, corrosion and correct routing.
- Lubricate prop and check bolts are
secure.
- Check diff mounting bolts.
- Change fuel filter.
- Change gearbox oil.
- Change engine oil and filter.
- Change diff oil.
- Check condition of steering joints, rack
gaiters, ball joints and wishbone bushes.
- Check for fluid leaks from hydraulic
pipes and unions (power assisted steering only).
- Check tyres for correct spec and damage,
road wheels for damage, refit to original position.
- Check all suspension fixings for
security.
- Check anti-roll bar drop link rubbers for
wear.
- Visually check complete underside of
vehicle for faults/abnormalities.
- Check security of exhaust manifold bolts.
- Check security of rocker covers.
- Change spark plugs.
- Check distributor cap, ignition leads and
low tension wires for deterioration and type.
- Check drive belts condition,
adjust/change if required.
- Change air cleaner element.
- Check condition of engine and gearbox
mounting rubbers.
- Check throttles and linkage operation and
lubricate where possible.
- Check/top up pas fluid (where
applicable).
- Change clutch fluid.
- Check/top up windscreen washers and check
wiper blade condition.
- Check master cylinder and under bonnet
grommets are sealed, reseal if required.
- Check engine breather/hoses for security
and condition.
- Check/adjust ignition timing with engine
at operating temperature.
- Check/renew engine anti-freeze.
- Check cooling system for leaks, hoses for
security (pressure test).
- Check cooling fans operation.
- Check/adjust tyre pressures (inc spare).
- Check headlight alignments and auxiliary
lights (if fitted).
- Check/adjust tracking front and rear.
- Check/adjust cambers front and rear.
- Check/adjust/lubricate all hinges and
doors, boot and bonnet locks/catches.
- Road test the vehicle.
- Centralise the steering wheel (if
necessary).
- Clean exterior and interior of vehicle
and stamp service book.
|
|